Quote from yesterday

In a free society, it is hard for 'good' people to do 'good,' but that is a small price to pay for making it hard for 'evil' people to do 'evil,' especially since one man's good is another's evil.

Milton Friedman

Layers of fact checkers

Boston Globe, in a story about the wardrobe choices of Senator Brown, R-MA:

Correction: Because of a reporting error, a story in today's "g" section about Senator-elect Scott Brown's barn jacket incorrectly implies that author Naomi Wolf advised Al Gore on his clothing choices during his 2000 presidential bid. Wolf consulted on women's policy issues for the Gore campaign.

Jessica Simpson mistakenly complementing the US Secretary of the Interior:

"I was introduced to the Secretary of the Interior, Gale Norton, I said, 'I really like what you've done with the place.' I had no idea that she was a member of the Cabinet, not an interior decorator!"

the junkman prevails

My outfit was spring-cleaning not long ago, and a TrippLite PR40 was destined for the heap.

It's a 40-ampere DC power supply. Well, it was, but it wouldn't supply any DC recently, and it was part of a suite of electronics that had been forklift-upgraded anyway. The proponent of the forklift upgrade didn't ask for it to be turned in.

Your humble narrator chose to snag it instead of letting it go to the heap, because I need a supply for other amateur radio gear that comes along.

This supply had no output voltage at all. I opened it and took the regulated DC off of the final board. Bingo, 22VDC. The crowbar circuit on the final board was shorting the output to ground, as designed.

TrippLite does not offer schematic diagrams for its products. It offered to take this PR40 back and offer me a sweet deal on a refurbished PR40. Total with shipping (this units weighs about 30 pounds) would have been around $200.

I asked around on qrz.com and was told that, likely, there are 4 NPN power transistors in parallel that clamp raw dc down to 13.8VDC, and one of them is smoked. If I wanted to go the incremental route, first change the IC that was applying the bias to those 4 transistors. For comparable power supplies, like an Astron, there's an IC just to do that. The TrippLite does not use that part, but 3 of the 4 opamps on a quad IC instead.

The quad opamp came for about $10 shipped. That didn't do it, replacing the power transistors would come next. I parked this project in the man cave.

The project came back around on the lost-cause rotation, so I sought out a good price on 2N3771 in TO3 cans on eBay. Somebody took my Make An Offer offer, 4 of them plus shipping for under $10.

I put them in tonight. With their outputs still away from the final board, dammit the output voltage was still 22V.

I touched up the joints on the opamp pins and tried again. Still nope. As I started to pack the tools away, it occurred to me that the IC on the final board might not be able to bias the transistors to cut the raw dc down to the desired 13.8V, if the outputs of the transistors are not coupled to the final board.

With the regulator outputs connected to the final board, the output voltage settled at 13.86 or so VDC.

I assembled the supply as far back to factory as possible, and found that I needed a new way to insulate the output post from the cabinet. The original supply used a stack of plastic washers, which disintegrated as I disassembled the supply the first time.

I improvised a pair of insulators from scrap lexan, one inside and one outside the cabinet, with a dab of silicone caulk to keep the red post centered in its hole through the cabinet.

I'll go back inside in a few days and put a rubber O-ring around the red post to better center it in the hole so it doesn't short out.

So now we have a 40A regulated DC supply for about $20. And we also can hook on to the raw DC in this supply for DC of higher voltage than the pickup truck would provide, the next time there's some anodizing to do.

Strip the Supremes of 'their' clerks

Lawprof goodness:

The simplest solution would be to strip the Justices of all their clerks. We think such a step is unnecessarily radical. Instead, we propose that Congress reassign the clerks (perhaps in reduced numbers) to the staff of the Court’s Librarian. The Librarian would choose and supervise the clerks, who would not be permitted to draft legal opinions. . . our intent is not to punish the Court or its members, but to encourage the Court to operate more like a judicial body and less like an academic faculty cum super-legislature.

Guest bloggers at VC.

There's a parallel here with Members of Congress voting on laws they haven't read: judges deciding cases on the bases of research they haven't read, and expressing their decisions through rulings they didn't even write.

We often get our cause and effect reversed

Gallup today:

PRINCETON, NJ -- In the wake of Republican Scott Brown's victory in Tuesday's U.S. Senate election in Massachusetts, the majority of Americans (55%) favor Congress' putting the brakes on its current healthcare reform efforts

No, I think Gallup has it backwards, even exactly backwards. Because Americans disfavor current health care legislation, a Republican running against it won the U.S. Senate election in Massachusetts.

"In the wake of" is a sloppy way to write of cause and effect anyway. It implies sudden displacement rather than the steadily accumulating boilover that actually took place.

Quote for the day

Courtesy Radley Balko:

If only the media had as much contempt for lying, thieving, corrupt politicians as they do for sports stars who use steroids.

Some things are ageless

A reader at Instapundit notes:

I can’t think of any other transportation device, and very few machines of any kind, that can still function as a profit making business tool nearly 80 years after they were designed.

Emphasis mine. John Moses Browning's M1911 is still out there, profitably if you will. But it wasn't designed by committee.

The humble can opener really needs updating to the XXI Century.